2. Load Firmware using Telegesis Terminal
Telegesis Terminal can be downloaded at:
or any other serial communication tool that supports Xmodem-CRC.
2.1 Procedure for Bootloading
If you choose Telegesis Terminal (V4.0.2), start by clicking [File] → [Open Layout] (or [Ctrl-O]) and select the [CombinedInter-
face.xml] button layout. The buttons shown at the bottom of the screen can be selected after loading the CICIE firmware to verify
whether the firmware has been loaded successfully.
Figure 2.1. Open Layout
UG228: Bootloading New Firmware onto an ETRX358USB User's Guide
Load Firmware using Telegesis Terminal
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.1 | 2